What is 192.168.0.1?
192.168.0.1 is a private address used as the admin page of many home routers. Open http://192.168.0.1 while connected to the router and log in with the details on its label. If your device's default gateway is a different number, 192.168.0.1 is not your router.
It's a common factory default on many retail routers and Wi-Fi extenders. Brands often use it on some product lines and not others, so check the label or your default gateway rather than going by brand.
Network details
With the usual home-network mask of 255.255.255.0, a router at 192.168.0.1 manages this range:
| Address type | Private (RFC 1918), not reachable from the internet |
|---|---|
| Network | 192.168.0.0/24 |
| Subnet mask | 255.255.255.0 |
| Device addresses | 192.168.0.1 – 192.168.0.254 (254 addresses) |
| Broadcast | 192.168.0.255 |
Some networks use a different mask. Your device's network details show the real one.
How to log in to 192.168.0.1
- Connect to the router by Wi-Fi or cable. Mobile data won't work.
- Confirm the router's address: it should match the default gateway in your network settings (how to check).
- Type
http://192.168.0.1in the browser's address bar, not the search box. - Sign in with the admin username and password from the router's label, or the ones you set.
- After logging in, change the admin password if it's still the one on the label.
Common typing mistakes
- 192.168.o.1 (letter O instead of zero)
- 192.168.0.l (letter L instead of 1)
- 192.168.01 (a missing group)
- 192.168.0.1.1
192.168.0.1 vs 192.168.1.1
They're two separate networks: 192.168.0.x and 192.168.1.x. A device on one can't open the other's admin page unless something routes between them, which is why trying the "wrong" one just times out. Neither is better; routers simply ship with one or the other.
If both open from your device, you have two routers in a chain, which is covered below.
Double NAT: ISP modem plus your own router
A typical setup is an ISP fibre unit on 192.168.1.1 with your own Wi-Fi router plugged into it, using 192.168.0.1. Traffic is then translated twice (double NAT). Browsing works, but you may notice:
- Port forwarding that doesn't work, because the outer device blocks the traffic first.
- "Strict" or "Moderate" NAT type on game consoles.
- Two Wi-Fi networks competing if both devices broadcast.
The fix depends on your ISP. You can ask them to put their unit in bridge mode so your router gets the public connection directly, or set your router as the DMZ host on the ISP unit. If you only need better Wi-Fi, put your router in access point mode instead. Test afterwards with the port checker.
If 192.168.0.1 doesn't open
- Wrong address. Check your default gateway; your router may use another address.
- Not connected to that router. Turn off mobile data and VPN apps, and connect to its Wi-Fi or cable.
- Browser upgraded to HTTPS. Type
http://explicitly, or try another browser. - Router frozen. Restart it: unplug for 30 seconds, wait 2 minutes.
- Still stuck? See the full router login troubleshooting and reset guide.
Questions
What is the username and password for 192.168.0.1?
There isn't one universal password. Most routers print their admin username and password on a label on the bottom or back, and many newer and ISP-supplied units have a unique password per device. If the password was changed and nobody knows it, a factory reset restores the label's details. Lists of "default passwords" online are often wrong for your exact model.
Why does 192.168.0.1 not open but 192.168.1.1 does?
Because your router uses 192.168.1.1. Only the address matching your default gateway opens your router's page.
Is 192.168.0.1 safe?
The address itself is just a private number. What matters is that the admin password isn't the default one and that remote management from the internet is turned off.
My range extender uses 192.168.0.1 — why can't I reach it?
After setup, many extenders take a new address from your main router. Check the connected-devices list on the main router, or use the extender's app or web domain from its manual.