192.168.1.1 router login

What is 192.168.1.1?

192.168.1.1 is a private IP address that many routers and ISP-supplied fibre units use for their admin page. Type http://192.168.1.1 into the address bar while connected to the router, then sign in with the details on the router's label. It only works if 192.168.1.1 is your router's address. Check your default gateway to be sure.

It's the factory default on a large share of home routers and on many fibre ONTs and DSL modems supplied by ISPs. Some manufacturers use it for some models and a different address for others, and firmware updates can change it. Treat it as a likely guess, not a certainty. Your device's default gateway is the definitive answer.

Network details

With the usual home-network mask of 255.255.255.0, a router at 192.168.1.1 manages this range:

Some networks use a different mask. Your device's network details show the real one.

How to log in to 192.168.1.1

1. Connect to the router by Wi-Fi or cable. Mobile data won't work.
2. Confirm the router's address: it should match the default gateway in your network settings (how to check).
3. Type http://192.168.1.1 in the browser's address bar, not the search box.
4. Sign in with the admin username and password from the router's label, or the ones you set.
5. After logging in, change the admin password if it's still the one on the label.

Common typing mistakes

• 192.168.l.l (letter L instead of 1)
• 192.168.1.1.1 (an extra group)
• www.192.168.1.1 (no www before an IP address)
• Searching “192.168.1.1” in Google instead of typing it in the address bar

Two devices both using 192.168.1.1

A common problem appears when you add your own router behind an ISP modem and both ship with 192.168.1.1. Devices get confused about which one is the gateway, the new router may refuse to connect to the internet, and the admin page you reach depends on which device answered first.

Fix it by giving the second router a different LAN address, for example 192.168.2.1, in its LAN or network settings. You can also switch it to access point mode so it hands out Wi-Fi without routing, which is usually the better choice for a simple Wi-Fi upgrade.

“Your connection is not private” on 192.168.1.1

Some routers redirect to https://192.168.1.1 with a self-signed certificate, which browsers flag. On your own network and when you typed the address yourself, this warning is expected. Choose Advanced → Proceed. Never accept the warning for a website on the internet.

If 192.168.1.1 doesn't open

• Wrong address. Check your default gateway; your router may use another address.
• Not connected to that router. Turn off mobile data and VPN apps, and connect to its Wi-Fi or cable.
• Browser upgraded to HTTPS. Type http:// explicitly, or try another browser.
• Router frozen. Restart it: unplug for 30 seconds, wait 2 minutes.
• Still stuck? See the full router login troubleshooting and reset guide.

Questions